Dry installation course of action: Installing adhesive PDLC film is a dry approach. by no means use water; alternatively, use 99% isopropyl Alcoholic beverages (industrial alcohol) to clean glass surfaces. usually do not function until finally the glass area is a hundred% dry!

move five: right before installation you should measure the air particulates while in the place. We do supply an air particulate meter to verify the dust ranges are reduced during installation. shouldn't be higher than PM2.five.

Step 3.1: Just about every FILM has busbar and a quick wire on it. If you want supplemental wire, you may invest in typical wires from a neighborhood components retail outlet and solder to the prevailing wire.

atmosphere planning: remember to be certain the do the job surroundings is as clean and mud-totally free as is possible. Dust will quickly result in bubbles in between the PDLC film and also the glass area. before the glass, You'll need a totally free House equivalent to the height on the glass itself to have the ability to move easily.

Total though, SmartTint provides a fantastic array of products and solutions and you need to Look at them out whenever you get the possibility. Unfortunately, they don’t supply comprehensive panes of smart glass.

The Smart FILM’s protective layer on the non-adhesive aspect ought to be held over the installation till the installation procedure is completely finished.

just before Installaion, you need to clear the glass surface to get rid of all oil and debree. Please Make certain that the installation location is freed from debris both air borne such as animal hair, dust, oil and any opportunity contaminants.

Avoid applying pressure to the film: usually do not implement any force towards the film as This could damage the film or result in delamination. When cleansing the film, use a delicate touch and stay away from urgent also really hard.

change all around Time At Smart Film, we don't just present the website here most effective switchable glass and switchable film engineering available, we provide the best switch about situations.

-Remove the protective coating from your Get hold of facet of the material just before installation on the Non-Adhesive film and clear the actual Smart Tint and the glass with ninety nine% isopropyl Alcoholic beverages only.

This custom cut palladium window was retro healthy with Non-Adhesive Smart Tint and simply installed making use of 3m double sided obvious tape over the perimeter from the glass. The client sent us a template and we Slice to match prewired and transported a ready to install kit.

Smart Film® switchable privateness film™ is private frosted and opaque when run off and clear distinct when run on.

surroundings planning: you should make certain the get the job done natural environment is as clean and dust-no cost as possible. Dust will simply result in bubbles involving the PDLC film as well as the glass area. before the glass, You will need a cost-free space equal to the height in the glass itself in order to go simply.

They hired a local tint contractor to install and an electrician to attach the wires to a wall mounted swap. Have a look at the completed product they despatched us!